Home › Blog › AI Implementation Consultant for One Owner: The Handover

AI Implementation Consultant for One Owner: The Handover

Short answer

An ai implementation consultant is the person who takes your Claude subscription from something you poke at and turns it into a workspace your business actually runs on. I build that workspace on Claude and hand it to you through CoworkConsultant.com, files and all, so it still works after I am gone.

This is for the owner of a five to twenty person business who already pays for Claude, opens it now and then, and has nothing in the business actually running on it yet. You are not looking for another explainer. You want someone to build the thing, hand it over, and leave you able to run it alone.

Key facts

Item Detail
Built for An owner of a small team who already uses Claude casually and wants it running the actual business
What it handles Mapping the repeatable workflows, building the plugin and skills around them, and training the team to run it
Who builds it Michael Robichaud, working directly with the owner through a guided intake and a build
What it never does It never leaves without a handover, and it never hands over a workflow nobody can explain

What the handover actually includes

You feel the friction every day. Claude sits open, your team has questions, and the work still happens the old way it always has. The gap is not effort or willpower, it is that most help stops at ideas instead of an owned workflow your business keeps using after the call ends. The same gap shows up across the profession playbooks at CoworkConsultant.com, no matter the business.

Consultant reviewing a workflow report with a small business owner in an office - a guide to custom claude plugin for small business owners
Consultant reviewing a workflow report with a small business owner in an office.

The handover I build is meant for you to run without me in the room. It targets the handful of tasks where Claude can take a real load off your plate: drafting, review, internal updates, and decisions you can trust because you can check them yourself. Where a team needs a repeatable rollout, this is also where plugins and skills earn their place.

Before I build anything, I help you decide what is fine as is and what needs a custom layer. For the do it yourself route, the Foundation Plugin is a solid place to start on your own. For the done for you route, I build the pieces your team can use immediately, with clear ownership from day one.

  • A specific set of workflows your team can run the same way every time
  • Instructions written so your team can follow them without you explaining
  • Review steps built into the workflow, not left to memory
  • Guardrails for what gets flagged back to a person instead of finished outright
  • A handover session that transfers responsibility, not just a folder of files

What a custom Claude plugin for small business owners does

Two small business owners reviewing a handover workflow sketch at a workshop bench - a guide to custom claude plugin for small business.
Two small business owners reviewing a handover workflow sketch at a workshop bench.

A custom Claude plugin for small business owners turns talking to Claude into business behavior your team repeats the same way every time. It takes your real templates, your standards, and the words you do and do not use, and turns them into something you can hand to staff without leaving the details to guesswork.

It matters most when several roles touch the same piece of work: intake, a proposal draft, an onboarding note, an internal status update. Claude plugins give that chain a consistent shape, so your team knows what to produce, what to check, and when to bring it back to you.

When you want the done for you version, I start by mapping your highest friction tasks, then build the smallest custom layer that makes those tasks reliable. If you are not sure whether an installed plugin is enough or you need something custom, that question is worth more than a guess, and the full range of builds shows where the line usually sits.

Installed plugin vs a custom build

What you need An installed plugin A custom Claude plugin
Templates and tone Generic, built for the role in general Built from your own files and standards
Review steps Left for you to design Built into the workflow from the start
Team consistency Varies with how each person uses it The same shape for every team member
Ownership after setup Yours to configure further on your own Files you keep, edit, and run without me

Prompt: map your first custom Claude plugin workflow

Look through the files already in this connected folder. List the three tasks that come up the most and follow roughly the same steps every time. For each one, tell me what information you would need before you could do it without asking anyone first.

What comes back is a short list, not a finished build. Read it against your own week and check whether the pattern actually holds before you plan a custom Claude plugin for small business owners around it.

The skills inside the plugin

Hub diagram of the four skill types inside a custom Claude plugin: drafting, review, consistency, safety - a guide to custom claude plugin.
Hub diagram of the four skill types inside a custom Claude plugin: drafting, review, consistency, safety.

Inside a build, claude skills correspond to specific jobs your team already does: summarizing a customer file, drafting an update, or preparing something for your review before it goes out. Claude documents the mechanics of its own skills directly, and the shape stays the same. Only the content is yours.

When I build custom claude skills for your business, they are tied to your own standards and your own workflow, not a generic template. You end up with behavior your team can reuse across similar situations while you keep the review authority exactly where you want it. Anthropic also documents how plugins bundle a set of skills together for one install.

  • Drafting skills built around your templates and your tone
  • Review skills that raise the right questions before anything ships
  • Consistency skills for intake and handoff between roles
  • Safety skills that flag missing or unclear information instead of guessing

Prompt: draft a skill description for one repeated task

Pick the one task in this folder that repeats every week. Write a short description of what starts it, what the finished output should look like, and what a person should check before it goes out.

The description that comes back is a rough draft of a skill, not a finished one. Bring it to a scoping call and it becomes the first thing built into your plugin.

How the handover works, week by week

Flow diagram of the four-stage handover: pick the workflow, build the layer, run with the team, hand it over - a guide to custom claude.
Flow diagram of the four-stage handover: pick the workflow, build the layer, run with the team, hand it over.

The first stretch is about getting clear, not about building yet. You name the workflows worth running first and decide what stays simple versus what genuinely needs custom behavior. I am also watching for the points where your team will drift back to the old way, because that is where adoption actually fails.

In the middle, I build the custom layer and connect it to how your team already works. You see drafts and checks as they happen, so the handover is never a surprise dump at the end. If you are weighing a consultant against doing it yourself, this is also where Michael Robichaud helps you find the smallest workable path, including the honest do it yourself route when that fits better.

Near the end, the focus shifts to your team’s readiness, not just your approval. You get a handoff built so someone else can run the system day to day, and you can adjust it yourself as your process changes. Start at CoworkConsultant.com, or go straight to the small business framing if a team, not just you, needs to be running on it. For the hands-on version, see owner-to-owner help rolling AI out to a team. For a ready-made version, see who you’ll work with. You can start from Claude’s consulting pack instead.

  1. Pick the first workflow and define who has final review
  2. Build the custom plugin layer around how that workflow actually runs
  3. Run it with the team and adjust wherever people hesitate
  4. Complete the handover so you can operate and change it yourself

Prompt: list what only you know how to do

Read through the most recent files in this folder and list every task where the same person keeps making the final call. For each one, write a single sentence describing what that person is actually checking for.

That list is the real intake document for a build. Whoever builds your plugin starts there, not with a blank workspace.

What a starter file looks like

Example: a starter CLAUDE.md for a small business owner

# CLAUDE.md

## Business
[Business name], [industry], [team size] people.

## Voice and standards
- Tone: [how you want written work to sound]
- Always check: [the thing that must never be wrong]

## Repeatable workflows
- [Workflow name]: starts when [trigger], produces [output], reviewed by [who]

## Connected files
- [The exports, folders or templates the business already works from]

This is the shape of the file, not a finished one. The real version gets built from your own answers during the intake, not filled in from a template.

There is a difference between reading what a handover looks like and opening the one process only you actually know how to run and writing down the step nobody else could repeat tomorrow. That second one is the real work, and it is worth doing with someone in the room. If you want to do it together, book a scoping call on CoworkConsultant.com and bring the one workflow you would hand over first.

This is the kind of handover that gets built in a week; done-for-you AI implementation shows what that engagement looks like.

Frequently Asked Questions

What is a custom Claude plugin for small business owners?

It is a private bundle of skills and instructions built around how your business actually works. CoworkConsultant.com builds it directly with the owner, then hands over every file.

What does a custom plugin do that Claude does not do out of the box?

Claude out of the box is general purpose. CoworkConsultant.com builds a plugin around your own templates, standards, and review steps, so the same result comes back every time.

Do I need a developer to get a custom Claude plugin or skill built?

No. CoworkConsultant.com handles the build and the handover directly with the owner, and every file transfers to you when it is done.

What are Claude skills, and how are they different from a plugin?

Claude skills are the individual behaviors, like drafting or reviewing one kind of document. CoworkConsultant.com builds the plugin as the container that holds the skills your business needs together.

Who owns the plugin, the skills and the files after it is built?

You do. CoworkConsultant.com hands over every file at the end of the build, and Michael Robichaud builds for ownership, not for a dependency you keep paying to run.

How do I know whether an installed plugin is enough or I need a custom one?

CoworkStack.ai offers installed plugins for roles that already fit well. CoworkConsultant.com builds custom when your workflow, your review rules, or your business does not match one.

What happens to the plugin when my business or my software changes?

The handover includes how to update the workflow yourself. CoworkConsultant.com can also revisit the build with you if your process changes enough to need it.

Michael Robichaud

Written by

Michael Robichaud

Claude consultant and founder of Strategized.ai. Michael sets Claude up one-on-one for professionals and small teams, connected to your tools and trained on your real work, and designs custom Claude plugins for specific professions.

 ·  Connect on LinkedIn →

On this page

  1. Loading sections…

About the Author

Michael Robichaud

Founder of Strategized.ai and CoworkConsultant.com. 30 years across enterprise sales, digital marketing, and building businesses. Configuring Claude for professionals who came to AI from the business side, not the other way around.

Stuck on something specific?

Book a free 20-minute call. Open calendar, evenings and weekends included.

The Strategy Stack Ecosystem

Consultant is one part of a larger system.

Want this set up for you instead?

Reading is one thing. Having a Claude workspace built around your business is another. That is the work I do with owners and teams here at CoworkConsultant.com, and it starts with a short call.

Keep Exploring

More from the blog

Strategy, GEO/AEO, consulting perspectives.

Browse the Blog →

Need it built for you?

1:1 strategy, done-for-you workspace builds, fractional AI advisory.

Visit Strategized.ai →

Claude plugins by profession

Ready-made Claude plugins for your role, $99 each. Or start free with the Foundation plugin.

Browse the Claude plugins →